The Tracer®vm Base Flowmeter is a non-display sensor that provides a 0.5 to 3.5 Volt output for process flow rate and a 0.5 to 4.1 Volt output for process temperature.
Vortex sensor technology is highly accurate and repeatable without moving parts. Flow reading is direction specific. Refer to the arrow on the body for correct installation.
Connection to the process is made using standard pipe threads in NPT or BSP from 3/8″ through 1-1/2″. Flow body materials are corrosion-resistant brass, nylon, anodized aluminum and stainless steel. The flowmeter is designed for use in industrial water applications such as injection mold cooling or filter and pump monitoring.
Features and Benefits
- No moving parts for reliable operation
- Flow and Temperature Sensors in one unit for compact installation
- Quick temperature response from direct media contact
- Economical and versatile construction with corrosion-resistant materials
Specifications
| Connection Size | Flow Range GPM | Flow Range LPM |
|---|---|---|
| 3/8″ or 1/2″ | .3 to 4 GPM | 1 to 15 LPM |
| 3/8″ or 1/2″ | .5 to 10.6 GPM | 2 to 40 LPM |
| 3/4″ or 1″ | 1.3 to 26.4 GPM | 5 to 100 LPM |
| 1″ or 1-1/2″ | 2.6 to 52.8 GPM | 10 to 200 LPM |
Materials
- Sensing Element – Silicone-Based MEMS Sensor
- Seal (sensor to housing) – EPDM Rubber
- Insert – PPA 40 GF
- 3/8″ & 1/2″ Body Size – Glass-Filled Nylon Flow Body with Brass or Nylon End Caps
- 3/4″ thru 1-1/2″ Body Size – Anodized Aluminum or Stainless Steel Flow Body
Power
- Power Required – 5VDC ±5% (not included)
- Power Consumption – < 50mW
- Load Impedance – > 10kΩ
Output
- Output signals – Ratiometric
- Flow Signal – 0.5 – 3.5V (zero at 0.35V)
- Flow Accuracy – ±1.5% of full scale
- Temperature Signal – 0.5 – 4.1V
- Temperature Accuracy – ±0.5°C
Operating Temperature: 0°C to 120°C (32°F to 248°F) Operating Pressure: 10.3 bar max. (150 psi max.)