Pumps, Tanks & Storage
Storage Tanks & Loading
Tank level and overfill protection, custody transfer metering for loading and transfers, tank vent protection and product sampling.
Measures: Tank level & interface · Overfill protection · Custody transfer flow · Flame arresting · Sampling
Tank Level
Magnetostrictive transmitters measure product level and the water interface accurately for inventory. Guided wave radar, laser, ultrasonic, submersible and differential pressure transmitters cover other tanks, sumps and silos, including water storage tanks.
LMT100 Magnetostrictive Level TransmitterABB K-TEK LMT100 in-tank magnetostrictive level transmitter for total and interface level to 0.01% of full scale, probes to 22 m, pressures to 165 bar.
LWT300 Guided Wave RadarABB LWT300 guided wave radar level transmitter for up to 204 °C and 207 bar, with hazardous-area certification, HART 7 and SIL2/SIL3 options.
LLT100 Laser Level TransmitterNon-contact laser level measurement solutions Industries served Customer benefits Level
LST200 Ultrasonic Level TransmitterABB LST200 non-contact ultrasonic level transmitter with a modular design and simple commissioning, for water and wastewater tanks, wells and channels.
815LT Smart Level TransmitterSOR 815LT submersible smart level transmitter with vented cable, HART 7 and Modbus, for ranges from 0-35 to 0-575 ft water column.
Hydrostatic Level TransmitterSOR 510 submersible hydrostatic level transmitter for deep sumps and wells, 3 to 140 m water column, in a stainless steel housing.
800 Series Smart Pressure TransmitterSOR 800 Series smart pressure and differential pressure transmitters (805PT, 805QS, 815DT, 815PT): compact and loop powered, for hazardous areas.
High & Low Level Alarms
Independent level switches give high-high level alarms for overfill protection and low level alarms to protect pumps.
Float Type Top Mounted Level SwitchSOR 300 Series top-mounted float level switches for smaller tanks and sumps, vacuum to 51 bar and -40 to 427 °C, with a 5-year warranty.
Displacer Type Level SwitchSOR 700, 730 and 750 Series top-mounted displacer level switches with up to 4 set points, for large tanks, deep sumps and pump control; vacuum to 69 bar.
1510 Side Mounted Level SwitchSOR 1510 side-mounted float level switch with manual check, for vacuum to 345 bar and -40 to 204 °C, explosion-proof or intrinsically safe.
Single Point Ultrasonic Level SwitchSOR 701, 711 and 721 single-point ultrasonic level switches with no moving parts and no calibration, for up to 135 bar and -40 to 121 °C.
Dual Point Ultrasonic Level SwitchSOR 712 and 722 dual-point ultrasonic level switches for high and low alarms or pump control; the 722 self-tests even with no liquid present.
FLT93 Thermal Dispersion SwitchFCI FLT93 heavy-duty thermal dispersion flow and level switch with no moving parts, for liquids, gases and interfaces in process plants.
Local Level Gauges
Magnetic and reflex level gauges show the level at the tank without power.
KM26 Magnetic Level GaugeABB K-TEK KM26 magnetic level gauge: a float drives a highly visible indicator with no process fluid touching glass, for toxic, corrosive, high-pressure or hot service.
Reflex Level GaugesSimco reflex glass level gauges for boilers, vessels and tanks: prismatic glass shows the liquid as black against a bright vapour space, for a clear local reading.
Loading & Custody Transfer Metering
Helical turbine, multi-chord ultrasonic and Coriolis meters measure liquid hydrocarbons for loading and transfers, with custody transfer approvals. Ex-rated clamp-on ultrasonic meters measure fuel and product flows from outside the pipe, and a portable clamp-on meter makes temporary checks.
Heliflu TZNThe innovative design and extended product range of helical turbine meters address your highest flow metering requirements.
FH Sonic Ultrasonic FlowmeterFaure Herman's newest meter (2025): an inline multi-chord ultrasonic flowmeter for custody transfer of liquids, with MID Class 0.3 and OIML R117 approvals, negligible pressure drop and transducers that can be replaced without draining the pipe.
Fixed Minisonic II Ex-proof housingFaure Herman clamp-on ultrasonic flowmeter in an explosion-proof aluminium or 316L housing for ATEX zones 1 and 2, with one or two chords and 4-20 mA and Pt100 inputs.
Portable Ultrasonic Flow MetersFaure Herman portable clamp-on ultrasonic flowmeter (Uf801P) for checking liquid flow on any pipe without cutting in: accuracy to 0.5%, multi-layer pipes, 11 stored set-ups.
FCB400 Series CoriolismasterWith no up or downstream piping requirements the compact Coriolis flowmeters can be installed in the tightest spaces, enabling applications not possible before.
Tank Vent Protection
Flame arresters on tank vents and vapour lines stop an outside flame from reaching the tank.
Product Sampling
Closed sampling systems take samples of LPG and liquid products for quality checks at the tank or loading point. Where a tank has no fast loop or power, the tank farm sampling system hand-pumps product from several levels through the sample valve and back to the tank.
Cylinder Sampling SystemSENSOR LGSS and VSS cylinder sampling systems for closed-loop grab samples of liquefied gases, high vapour pressure liquids and vapours.
Inline Sampling SystemSENSOR inline grab sampling system (ISS) built into a spool piece, sampling without a fast loop; suits high-temperature and high-viscosity service.
Tank Farm Sampling SystemRepresentative samples from several levels of a storage tank where there is no fast loop and no power: a hand pump circulates product through a flow-thru sample valve and back to the tank, and a totaliser shows when the line is flushed.
